Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Documentation Day One Books Knowledge Base Junos Software Versions
Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...
This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...
I will do that. Thank you! ------------------------------ BRANDON BASS ------------------------------
You might want to try this if you want to use the RJ45 port instead: root@switch# set system ports console port-type ? Possible completions: mini-usb Enable mini-USB rj45 Enable RJ45 ------------------------------ PAUL ...
This would work in a non-VPNv4 environment, since no-one by default would change the next hop IP (that of your external neighbour). But when exporting into the VPNv4 table the PE (in your case R5) will set the next hop to itself (since it considers itself ...
Greetings; I am using Junos Space and Network Director and my goal is to receive mail when the power of my switches goes out or there is a problem with the uplink port. I did it according to the guide below, but I only get mail from the threshold ...
THANK YOU SIR!!!! Switching to the USB console port worked like a champ. ------------------------------ BRANDON BASS ------------------------------
Complete this three-question survey to help us identify where you are in your upgrade journey.