Security

Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

Thank spuluka for your info. ------------------------------ Harry ------------------------------

Hi all, I hope someone can shed some light on this issue regarding bringing up an IPSec between an old SSG-550 (yes it's old!) and a Fortinet 1001. During the initial Ike-v2 P1 set with AES 256 encryption, SHA 256 auth and DH group 14 on both ends ...

I don't have any experience with the CG NAT features, but looking a the overview blog and documentation, it seems that all that is needed is the configure the inside and and outside interfaces for the flow. It would seem that could be the two interfaces ...

Hi Steve, I want to configure R2 as layer 3 transparent so that R1 and R3 can peer IGP and MPLS directly. But traffic between R1 and R3 has to pass through NAT card in R2. Can we make NAT card as a part of L2 bridge in R2? ------------------------------ ...

Sorry, I don't understand what you mean by NAT MS-MPC card. What is the function you or configuration sample you are referring to? ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, ...

Hi Steve, How can we sure this traffic pass through card NAT (MS-MPC) in R2. Can we use mams interface as l2-interface? ------------------------------ Harry ------------------------------