howdy! I'm so happy with the invitation from Juniper Networks to share my professional journey, some tips to prepare for certification exams and to help people with their professional career development. I'm happy to share all strategies and ...

Hi Josh, Thank you and I must have an old DC2 instance configuration then, as it looks like the below. Thank you for your confirmation and will double check. version 18.3R1.9; groups { DC2-routes { routing-instances { <DC2> ...

Ricardo, Thanks for the additional details. I looked at the VR-2 devices configurations for the DC2 instance and I do not see where RIP is configured. Can you share the configuration(s) you are talking about? [edit] instructor@vr-device-2# show ...

Just to be clear, this is for chapter 2 tasks 1&2. ------------------------------ Ricardo Simba ------------------------------

Hi Josh, I'm referring to the IGP section where routes from DC2 (a different domain) need to be injected and manipulated into either OSPF or IS-IS. The task description indicates that these routes are learned via BGP, and the verification examples are ...

Terry, After a bit of additional investigation I also found that while vJunos is distributed for free, unfortunately, technical support via JTAC is not available. You may be able to find some answers in the vJunos-switch community. ...

Terry, One of my colleagues did some testing in our environment and the t est results revealed that, contrary to what was specified in Pathfinder, BPDU protection is not working on vJunos-Switch. After configuring BPDU protection and receiving BPDU ...