SRX Next-Gen Firewalls

Hi, sorry for the late reply, have been real busy with my internship. I suspect the reason why my initial config didn't work is due to the 'mgmt' name. However, is possible for you to provide a psuedo-config? Thanks! ------------------------------ Ong ...

Thank you fb35523. You have given me clarification on this matter. As I suspected it was due to a limitation, but I was not sure if it was an issue of misuse. My question really should have included scalability as per each trunk link, i.e. 1-4, etc ...

I havve worked with MLT, SMLT and R-SMLT in Avaya switches in the past. As Extreme Networks bought the Avaya networking part, they also own the MLT technology. MLT is equivalent to LG, or aggregated Ethernet as Juniper calls it. You can run LACP over ...

Looks like the maximum number of member links for the SRX series is 16 members. ------ A physical interface can be added to any aggregated Ethernet interface as long as all member links have the same link speed and the maximum number of member links ...

I am only worried about how SRX Series supports my multilink trunks in my avaya switch cluster. The need to try to extend my trunks through these SRX's is my goal for now. The link I gave is the BASE for the technology. I realize that how my avaya cluster ...

The number of links in an AE bundle supported vary by platform. But should scale beyond 4. Also, if you mean number of AEs that set via a cli command and goes past 8. I'm kind of confused on what your concerns are, can you state platform and config ...

Thanx for the replies... The reason I am asking is because I have implemented a multilink trunk set but the documentation provides descriptions for links for up to 8 ports. I FEAR that due to my limitations that I cannot increase past 4 ports. My ...