Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories
In general, an st0.x interface needs to be added to a security zone and have "family inet" configured on it (no IP address needed, but could be). set security zones security-zone vpn interface st0.4 You don't need any "host-inbound traffic" for the ...
We don't see what Index 6963932 and Index 6963933 correspond to. Are the targets devices you're trying to OPTIONS ping configured the same way? Are they both expecting SIP TCP transport? For the one on st0.4 you seem to be using UDP transport. You ...
Just get in touch with Juniper Support, they can dig out a download link from the archives for you. ------------------------------ Nikolay Semov ------------------------------
So im pretty green when it comes to the srx and networking in general but have been in training the better part of the year. Anyway I'll be inheriting the SRX 550 from a colleague who will be retiring. I am having issue with an IPSEC Tunnel traffic ...
Hello, I can see that the version 20.4 for SRX4100 is no longer available for download from the Downloads page. Is it possible to either download it or would it be safe to upgrade from 19.4R3 to 21.2R3? ------------------------------ KRZYSZTOF ...
I would like to know if anyone has experience with this block. I want more additions but I haven't fully checked what is possible. It's a virtual switch so it seems to end up lean. Anyone got any ideas? It shows a lot of options but many are not compatible. ...
We're conflating multiple things here. ----------------------------- Note this: Session ID: 85899391940, Policy name: self-traffic-policy/1, State: Stand-alone, Timeout: 2, Valid In: 10.0.0.20/61488 --> 8.8.8.8/53;udp, Conn Tag: 0x0, If: ...
Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators.