Automation

It is not necessary to go via 'show' commands. The data you are looking for is probably available under 'junos_facts'. https://www.juniper.net/documentation/us/en/software/junos-ansible/ansible/topics/task/junos-ansible-device-facts-retrieving.html ...

try this as well, - name: get chassis hardware detail junos_command: commands: show chassis hardware detail display: xml ------------------------------ FRANCOIS VAN HEERDEN ------------------- ...

I got this figured out, was a bit more complex than i was hoping for --- - name: Grab Juniper's Monthly Request hosts: supported gather_facts: no connection: netconf vars_files: - ../../../Credentials/credentials.yml vars: ansible_network_os: ...

I am having issues automating something with ansible, Every month juniper requests us to give them a full inventory list of all of our devices, by running this command on the box and saving it in a file: "show chassis hardware detail | display xml | no-more" ...

I assume you are referring to the online Juniper vLabs. These are indeed self contained environments and don't provide for external connectivity. https://jlabs.juniper.net/vlabs/ ------------------------------ Steve Puluka BSEET - Juniper Ambassador ...

I am using juniper networks lab. where so many lab are present but no any is having external connectivity just like in cisco cml is having external connector . ------------------------------ POOJA SHINDE ------------------------------

Could you clarify the lab topology you are using? With physical devices in a lab we would generally setup a permanent mgmt network and connect the mgmt interface or dedicate a specific interface on each device to this network for access. Or as an alternative ...