Security

 View Only
last person joined: 9 days ago 

Ask questions and share experiences with Juniper Connected Security. Discuss Advanced Threat Protection, SecIntel, Secure Analytics, Secure Connect, Security Director, and all things related to Juniper security technologies.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or access the following resources: 

Documentation SRX Community Juniper Threat Labs Security Advisories

Latest Discussion Posts

  • Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

    1 person recommends this.
  • Hi folks, While testing firewall policies in isolated environment, I faced with a very strange behavior of the firewall. So, when a traditional security policy is created, from-zone and to-zone is specified. When it is checked with "show security ...

  • Profile Picture

    RE: Tunnel

    Well, as long as the Branch A admin already has policy and routes in place to push the branch B traffic to HQ you should be able to configure branch B and HQ to support it. If they don't have that in place, then there isn't really much that you can do. ...

  • Profile Picture

    RE: Tunnel

    This message was posted by a user wishing to remain anonymous If I understood correctly, in order for BranchA and BranchB to have communication, it is enough to reroute the traffic between BranchB and HQ, because I have access to them. I don't have ...

  • Profile Picture

    RE: Tunnel

    You should be able to just put routes on the routers to allow Branch A to use the HQ tunnel to send it's traffic for branch B to HQ which will then use the tunnel to branch A. That does assume that the other administrator will put a route for the Branch ...

  • Profile Picture

    Tunnel

    This message was posted by a user wishing to remain anonymous Hello everyone, I have the following situation. A tunnel was created on juniper routers, between BranchA and HQ, and with BranchB and HQ. BranchA and BranchB regularly communicate with ...

  • In a continued effort to streamline the RMA process, we have launched new questions/workflows when opening a JTAC ticket that enables you to initiate an RMA on your own. Below is a video walkthrough of the enhanced Self-Service RMA process. Feel free ...

    1 person recommends this.

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community