SRX Next-Gen Firewalls

Hi @fb35523 , Noted. Thanks for your feedback

Hi! That is one option and an easy one. I must say, (to my "proxied" embarrassment on Juniper's behalf) that the cryptos in that guide are way worse than in the Forti one :) Well, that's not the main topic and as you can see, there is very little extra ...

Hi @fb35523 , Are u referring to this url https://supportportal.juniper.net/s/article/SRX-How-to-configure-IPsec-VPN-to-work-with-ECMP-Route-based?language=en_US ? Thanks

Ok fine thanks ------------------------------ MUHAMMAD SAAD ------------------------------

It is quite easy to implement ECMP over IPsec too, so no need to go to FortiNet for that. ECMP over OSPF or BGP is commonplace and guides are available. If the goal here is to have a check box in the GUI to enable load sharing, go with Forti. If you want ...

Hi Nikolay, Noted. Thanks for your feedback. Look like i need to propose Fortinet due to that feature.

No, I don't think so ... :-( You can do dynamic routing or maybe even AppQoE (https://www.juniper.net/documentation/us/en/software/junos/application-identification/topics/topic-map/security-appqoe.html), but it's not as clean and simple as aggregate ...