Switching

Hi, I have such config and seems to work. I say "seems" cause I have done it a minute ago. Interface ae1 was created by ez-lag but it's possible to add something manually as well. comp@bal2# show interfaces ae1 ...

Hi Suraj, A port aggregation (LAG) is not equivalent to a trunk. If your single port works fine as a trunk and you want to use a LAG instead of a single port, you need to configure a LAG on both sides of the connection, and then configure the trunk ...

Thank you. There is a lot of suggestions on how to do this switch recovery. A lot say create a MS-DOS USB (that never worked for me). But what you have listed worked the first time. thank you. This really should be listed somewhere on here as the ...

Hi ALL, I have two Point-2-Point ISP Connection between different location, at each location link is terminated on EX4400. While we configured trunk at both side and pass all vlans, my all vlans of one location is working fine at another location, ...

bonjour Michel, When you commit new configuration you will get message that you don't have license but configuration will be committed. After that everything will work. BR, ------------------------------ IHOR SHTANKO --------------- ...

merci beaucoup Harry, based on Ihor comment, I'll probably install a spare licence on the spare switch like you did. the goal is to minimize downtime and everybody understand there is a price to be paid for that. tthanks, Michel ------------------------------ ...

bonjour Ihor I stopped at commit check on the spare switch. since what I got was a warning and not a fail, it just may work . I am getting prices on a spare bgp licence to keep things simple and quick. thanks for the link, take care, Michel ...