SRX Next-Gen Firewalls

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • This may be just an artefact of the name substitution, but just in case, the interface line should include icmprestrict , not example . On a separate note, you should include a third term stating what should happen to all other traffic. Otherwise, ...

  • You need to make sure that the script is copied to both REs and not just on the active RE. Then your commit will work,

  • Gooooood Afternoon. We're currently looking to restrict ping replies to only authorized IPs (our HQ and monitoring services) so that the firewall will not reply to ICMP echo requests from any other sources. I've applied the following config as a ...

  • On closer inspection, I have found that node0 of our firewall cluster does pass the commit check and it is node 1 that does not. I believe they are in an active/passive cluster. Has anyone used event-options in a situation like this? If so, is there ...

  • Greeting Junivators! Why did the smart vacuum get kicked off the Wi-Fi? It kept sweeping up too much data! 😆 In today’s smart home, we’re surrounded by IoT (Internet of Things) devices that make life easier—smart lights, robot vacuums, air ...

  • I suspect the reason is the permissions on the file I created. they are -rw-r--r-- Don't I need an execute in the permissions to run the script? ------------------------------ JOHN WILLIAMSON ------------------------------

  • That is really odd. I can just delete all of them then. ------------------------------ JOHN WILLIAMSON ------------------------------

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

Top Contributors in the Community