Data Center

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about Data Center Architecture and approaches.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Data Center Design Center Documentation Knowledge Base The Feed

Latest Discussion Posts

  • Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

  • And also update your install base information. I think this KB could help: https://supportportal.juniper.net/s/article/How-do-I-update-the-Install-Base-information-for-my-products ------------------------------ Fabian PROU -------------------- ...

  • Hi, Yes this is possible. Order DC PSU (if you have access to the configurator, after selecting the DC version you can get the list of SKUs that are included): So you will have to order 2x JPSU-650W-DC-AFO ------------------------------ ...

  • We have a requirement to change one of my QFX5120-AFO2 switches to DC power supply. Is this possible with existing AC-Chassis or should we purchase a new DC-Chassis Switch. I tried to find an answer on the community but only found that its possible ...

  • Dear all. I'm making a topo test DCI using vMX (using 23.2R1-S2.5 version). As configure evpn instance for DCI, I got this error [edit routing-instances EVPN_COMPUTE_10 protocols evpn] 'interconnect' EVPN: Only encapsulation mpls allowed ...

  • Yes, adding a the second set of identical commands as you note. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home -------- ...

    1 person recommends this.
  • Hello! Thanks for answer. Do you mean that I should to re-write these commands but with the new IP? Like this: set services service-set SS_NAT_MOBILE_3_0 syslog host 10.163.90.10 services info set services service-set SS_NAT_MOBILE_3_0 syslog ...

Announcements

  • Introducing AI-Native Networking

    With the right data, the right real-time responses, and the right infrastructure, our industry-first AINative Networking Platform delivers simplicity, productivity, and performance.

Unanswered Posts

Top Contributors in the Community