Switching

Hi all, I have a EX4600 switch that I suspect has hardware failure on the SFP port on it. Background of the problem is as follows: 1. the port in question has a SFP in it for CWDM wavelength 1330nm, 3rd party manufacturer 2. port in question was ...

I appreciate the help yall. Unfortunately, the s vlan configuration is for older EX devices that we don't use or aren't supported. I ran this past our Juniper TAM and he confirmed that it wouldn't work. Juniper switching platform is not a viable solution ...

EX2300/EX4300 being ELS JunOS config style, I guess QinQ is not configured with «dot1q-tunneling» that was for older switches... This was answered a long time and may work: Community Juniper / RE: Q-in-Q configuration on EX2300 ------------------------------ ...

Hi Rene1. Could you please tell me which model or OS version you performed the functionality test on? These options don't exist on the MX204/QFX5120/EX4550. ------------------------------ RYOTA KOSAKA ------------------------------

You could try giving snmp more breathing space try to avoid fragmentation at IP layer set snmp max-pdu-size 8000 control the poller set snmp throttle-threshold 80

As the subject line says, We are migrating our Core from 2 HP Procurve's to 2 JP EX4400s and the JPs are managed through Mist Dashboard. We are wanting to keep our HP core active while we migrate to the JP. The challenge for us is our vlans ...

Try this EX4300 Side (The NNI Head-end) You need to define the S-VLAN and then configure the interface facing the carrier to "push" that tag onto the incoming customer traffic. set vlans S-VLAN-1201 vlan-id 1201 set vlans S-VLAN-1201 ...