Routing

 View Only

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussions

  • Profile Picture

    IGP shortcut in Junos

    By DANIEL NG , 20 minutes ago

    configuring IGP shortcut in Junos copies the IGP learnt routes from inet.0 to inet.3. however, inet.3 is used by BGP only by default. if we want IGP to be able to use the LSP, 'set mpls traffic-engineering bgp-igp' command can already achieve it. ...

  • Profile Picture

    EVPN-VPWS SETUP Between Juniper and Cisco

    By Johnson V C , an hour ago

    HI Has anyone here successfully tested EVPN-VPWS between Juniper Networks and Cisco nodes? I am trying to set up one between an ACX7024 and an ASR920. The EVPN status shows as up, but the data plane is broken - ping fails between the CE ...

  • Profile Picture

    JNCIE-SP Workbook and Lab Initial Configs IGP Mism ...

    By Ricardo Simba , 2 days ago

    Hey guys, I noticed that the workbook shows BGP routes from DC2 being injected into both the OSPF and IS-IS sections, and the verification steps reflect the same. However, when looking at the actual devices in the lab environment, they appear to be ...

  • Profile Picture

    RE: TE metric not working in SR

    By DANIEL NG , 2 days ago

    found that this problem only exists with OSPF. ISIS seems to be fine. perhaps a bug? ------------------------------ DANIEL NG ------------------------------

  • Profile Picture

    TE metric not working in SR

    By DANIEL NG , 2 days ago

    in junos 25.2R2.11, the TE metric for SR does not seem to be working that the next hop is unresolvable in dynamic path. changing the metric to IGP in a compute profile can fix the resolution. the TED database and related RIBs all have the needed prefixes. ...

  • Profile Picture

    RE: Question Regards Route Leaking.

    By CHIHWEI LIN , 27 days ago

    Update: I solved this issue by simply adding the "from instance master" in the policy-statement, and I found I don't even need the instance-export to make it. work. Here's what I currently have: Configuration for pulling the route from inet.0: ...

  • Profile Picture

    Question Regards Route Leaking.

    By CHIHWEI LIN , 28 days ago

    Hello commuinities. I am trying to leak some desired prefixes from inet.0 to specific instance (let's say instance_A), so I can announce those prefixes to the peers who lives under instance A, here's the configuration. First of all, I've configured ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    By: Jodi Meier Jodi Meier , 10 months ago

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts

  • IGP shortcut in Junos

  • EVPN-VPWS SETUP Between Juniper and Cisco

  • JNCIE-SP Workbook and Lab Initial Configs IGP Mism ...

  • QinQ VPLS fundamental Issues Not discussed

  • DS-Lite with PCP not working on MS-MIC

  • RSVP LSP vs LDP Route Preference Behavior in Junos

  • Minor alarm: VMHost RE x Disk y Missing on MX960?