Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

About max-db-size, you can have a look at KB34539 too, which explain how to configure tomcat for the first time (basically you configure subscriber-management and the max-db-size, reboot, remove the max-db-size conf, reboot again). [Subscriber Management] ...

This message was posted by a user wishing to remain anonymous Thanks for the reply, never heard of this Tomcat subscriber architecture before your KB. Why is the database max size needed what does this do?

I did get around this issue by using a different install process via USB. The link to the article above isn't accessible to me unfortunately; 'elevated permissions needed'. ------------------------------ ISSAC GILL ------------------------------

Hi, I'd start with the following required BNG configuration in Junos 15.1+ (see KB31899 ): set chassis network-services enhanced-ip set system services subscriber-management enable set system configuration-database max-db-size 300m set system dynamic-profile-options ...

Just to be clear, to jump versions directly like this you will be doing a format install from the USB boot. This will erase the current configuration and make the device inaccessible so you will need local access. This also means you need to copy off ...