Switching

Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

I've been working on setting up SSL VPN on an SRX (using Juniper Secure Connect) with a public wildcard certificate, and I ran into certificate validation issues until I started looking more closely at the certificate chain. It made me realize that ...

sounds very much like a VLAN or DHCP relay issue somewhere in the path. Since it's a new SSID, I'd first double-check that the SSID is correctly mapped to the right VLAN in Mist, and that this VLAN is allowed on all trunk ports between the AP and the ...

wonder how to determine when to move from a 1GB uplink to a 10GB uplink? ------------------------------ Keith C ------------------------------

Installed version 23.4R2-S7.4 and it still didn't update the matching freebsd bootloader, I know there is a KB that indicates it should not cause any issue. [EX2300/EX3400/EX4400] WARNING: loader version: 1.2 should be >= 2.0 and version 23 is still ...

I'm building a mist environment using the FXP ports for access during the build, all good. But I need to switch to in-band management ( IRB ), as my customer does not have out of band, but as soon as I do, MIST will not recognise my devices. This is ...