Wireless

Hello, Anyone can help out on this ------------------------------ MUHAMMAD SAAD ------------------------------

Hi, Thanks for your reply. Basically from same access point and same SSID, the laptops are getting connected on 5 GHz and cell phones are not getting connected on 5 GHz. Moreover, on other access points the cell phones gets easily connected on 5GHz. ...

Assuming that the WLAN template applies to all APs in that site, and not limited to some APs with a device profile, check VLAN that WLAN is forwarding traffic exist in the switch, check that VLAN is in its trunk ports to the upward switches/routers, and ...

Thanks for your reply and helping out. I have trouble shoot the issue and found that some specific access points are not broadcasting the SSID on 5 Ghz due to which its getting connected on the farther AP. Now how this issue will be resolved. What needs ...

At previously said, devices take the decision about where to connect and when to roam, nothing you can't do except update drivers, firmware and software to see if that improves the experience. Or open a ticket to the manufacturer's support to see if they ...

Alright, I have again enabled the RF template on the site. Moreover, can you please check and validate the configuration of RF template as 2.4 Ghz has been disabled on the WLAN template. The RF template configuration has been attached. Moreover, ...

First, connectivity of the devices depend on the client device completely, the logic programmed by the developers in the driver/firmware of the wireless adapter, nothing you can do to make them connect where you want. Second, check if ALL APs are broadcasting ...