Junos OS

Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

Hi all, I am new to Juniper. I have configured my SRX300 which can only access 80, 443, 21 and 22 ports. Would like to know that there are any approaches to confirm the other ports that are blocked? Much appreciative if there is someone who knows ...

Hi Aqeel, For VM Hosted devices, the request system power-off command is replaced with the request vmhost power-off command which provides similar functionality. Juniper states: "For the devices with Routing Engines RE-S-2x00x6, RE-PTX-2x00x8, ...

Hi Paul, I found that even if I do not add set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server 10.10.10.1, after I added set security policies from-zone trust to-zone untrust policy trust-to-untrust match application ...

Hi Folks I'm looking for suggestions on how to monitor j-flow data being sent to a box where I can run applications like InfluxDB and Grafana. Specifically, I want to monitor various aspects such as the status of my peers, bandwidth utilization of my ...

Hello Gavin, Related to this query, we need to shutdown a MX10003 router and shift it to another DC. I was wondering what is the difference between 'request system power-off' and 'request vmhost power-off' here and which one should I use. I guess ...

Hello, Relating to same topic, we need to relocate a MX10003 router from one DC to another DC, and are required to power-off the router gracefully to be shifted. I checked Juniper documentation and little confused, should I use 'request system power-off' ...