Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Hi Andrei, Glad I could be of assistance, I'll be on vacation in August too, so back on the 18th or thereabouts. Go and enjoy your holiday and don't worry about scripts!! Regards, Andy

Hey Andy, Thanks a lot for both scripts. This is looking very promising, and at the first glance I think I like the timer approach more, especially since it's not something that has to trigger immediately. I also like that it's using different OIDs ...

Hi Andrei, The alternative script that I mentioned using an SNMP script approach would be based upon the following example. Please note that the OIDs used here are based on the lab setup that I am using, rather than your own setup, so you will need ...

Hi Andrei, Okay, so here is one example script. This is an event script, and is written in Python, and the approach of this script is such that it is triggered by a timer, in this example every 60 seconds. Once the script is triggered then it will ...

Hi ChrisLee, By default, PIC 1 operates at 25G. To enable visibility and configuration of the xe-0/1/0 and xe-0/1/1 ports, you must change the PIC speed mode using the following command: set chassis fpc 0 pic 1 pic-mode "1G/10G/25G" ." ------------------------------ ...