Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Good day, We use a off-site backup location with a ipsec tunnel. The max speed we get is 250mbps. for our purpose this is no issue. We get the bellow warnings indicating that the srx320 is running at max capacity. following the datasheet the ...

As far as i tested long time back, This command is not to save the configuration on USB. Its actually copying the whole OS to USB. In case of any internal memory failure, you can plug in the pendrive and bootup the device. ------------------------------ ...

Oh that's strange....that line is absolutely in my actual config...I wonder if when the Forum automatically stripped out encrypted password line it took some more with it. Weird. Anyway, yea, thanks for linking that doc, that's the one I followed to try ...

Ran a test in a small 3 router lab where I removed the passive on the loopback for one of the routers. There was no change in either the OSPF database or the routing table. The interface status did change from the state DRother to DR. ------------------------------ ...

I think you are probably missing something like: set system services dhcp-local-server group blah interface ge-0/0/1.0 I'm not sure what the system processes does, but I'm pretty sure it isn't setting up a dhcp server. Juniper's documentation ...