Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Have you found a solution to this? I'm having a somewhat similar issue where I have GRE tunnels that seemingly won't allow fragmentation. My simple test of having the physical interfaces set at 1500 bytes, creating a GRE tunnel on top of it with a higher ...

Not sure if you have taken a look at the following KB: https://supportportal.juniper.net/s/article/EX-QFX-How-to-troubleshoot-var-partition-usage-is-high?language=en_US Regards,

I don't have an answer, Keven, but I'll be following the discussion with great interest. I started installing my 260 EX-2300-C in 2020 and I must admit I stopped paying attention to this warning or trying to figure out the cause. Michel ------------------------------ ...

Hi, We are trying to set up full-cone NAT on an ISP SRX5K with SPC3, specifically for STUN/P2P applications. From our documenataion, it appears that Junos supports full-cone NAT using Persistent NAT , and also through a combination of Address Pooling ...

Hi, so we have an ex2300-c-12p running 23.4R1-S2.4 that is regularly reporting "Minor alarm set, RE 0 /var partition usage is high". After clearing storage with request system storage cleanup the error is gone for about a day and then comes back. Show ...