Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

    1 person recommends this.
  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • Sound like you are looking for the auto installation procedures where a device configuration can be sent to a factory new device. https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/junos-configuration-autoinstallation.html ...

  • I am running junos OS and wanted to give the devices start-up configuration. I dont know what the format for that configuration would be. The reason I am confused is that when you are configuring the devices live, you have to include the commit command. ...

  • Hi Sktma, I don't believe there is an exact like-for-like command on Juniper equipment. You can use the command: show snap statistics / show snmp inform-statistics These will give you general SNMP statistics, but if you want to break ...

  • Thanks @spuluka but this is where I started when I tried to access the boot menu and that lead me to the other KB article. Cheers ------------------------------ BOB HOLLINGSWORTH ------------------------------

  • This is the procedure that we've used to recover non-bootable ex switches in the past. It does seem to be very similar to what you already tried, so might not help. https://supportportal.juniper.net/s/article/EX-How-to-format-install-EX2300s-and-EX3400s-via-USB?language=en_US ...

Announcements

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community