SRX Next-Gen Firewalls

I'd like to flesh it out a bit further with some pseudo -config based on some multi-ISP scenarios I've encountered: ### for uniformity, the pseudo-config below has the two ISPs each in their own VR #### # monitor your ISP services rpm { probe ...

Hi Steve , Thanks for your reply . This means that i have to create 2 routing instances ( both forwarding ) for two ISPs currently in prod.inet.0 VR , ihave a default static route configured , which i have to remove ? and then call two ...

Hi all, I have a SRX300 which followed the instruction of an official document to configure which websites are allowed or not allowed to be accessed but the configuration does not work after I completed the configuration. The official document is ...

Yes, part of doing the configuration will add a forwarding instance. You can see an example configuration here. https://supportportal.juniper.net/s/article/How-to-configure-Filter-Based-Forwarding-on-SRX-for-a-typical-dual-ISP-scenario?language=en_US ...

Hello , I am having a requirement from client , they have SRX cluster with a custom routing instanace (Virtual router) called Prod.inet.0 All LAN interfaces ( vlan 5, vlan6,vlan 7)and WAN interface ( ISP1) are in this custom routing instance ...

Thank you for your help, It's resolved after reinstalling the system. ------------------------------ EL hatmi Khalid ------------------------------

Andy, it's CLI that's generating the "invalid user" error. Samar, maybe something got corrupted during the initial boot up and set up of the virtual machine. Try resetting it from the original file you downloaded. Alternatively, maybe something is corrupted ...