SRX Next-Gen Firewalls

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Does the Juniper SRX still provide time to NTP clients when it has lost synchronization with its own NTP server? Or does the SRX simply stop sending NTP to clients all-together? I believe it simply stops when it has lost its own NTP server, but ...

  • H/W: SRX320-POE S/W: JUNOS 23.4R2.13 ------------------------------ ALEX H ------------------------------

  • It works for me: set interfaces interface-range APInterfaces member-range ge-0/0/0 to ge-0/0/3 set interfaces interface-range APInterfaces native-vlan-id 15 set interfaces interface-range APInterfaces unit 0 family ethernet-switching interface-mode ...

  • It appears native-vlan-id is no longer supported under interface-range , but it is supported under individual interfaces. When upgrading to 23.x, config validation fails: Validating against /config/juniper.conf.gz /config/juniper.conf:447:(22) ...

  • Hi all. I've really tried to figure this one out my self, but I can't... so I turn to the gurus in the Elevate community :-) I have a firewall where I have a global rule that matches "dynamic-application junos:MSRPC" and "application any". This rule ...

  • This is the documentation example configuration to use Filter based forwarding noted above specifically for source address based routing. https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/example/firewall-filter-option-filter-based-forwarding-example.html ...

  • Code looks fine, what version of Junos on the SRX?

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community