Join Elevate
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories
I need an IEEE 802.3ad/LACP aggregate for link redundancy and bandwidth utilization. Current Junos 26.2R1.7 does not expose 802.3ad on the NFX150 physical interfaces. Is there an existing PR/RFE for NFX150 LAG/LACP support, and if not, can an RFE be ...
Reviving post! ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. Tech (Construction Management) A.A.S. I.T.T. Tech (Drafting & Design) ------------------------------
Your interface is configured as a Layer 3 interface type of "router on a stick" scenario. It does indeed have a VLAN tag associated on the sub-interface (unit), but it's by itself not configured as a Layer 2 interface included in a VLAN. Therefor, it ...
If you've double-checked you're indeed using a self-signed certificate, then the error message makes no sense -- the server certificate is also the issuer certificate. Maybe it's just a misreported error for an untrusted certificate? Have you tried adding ...
Hmmm ... I don't think the SRX was intended to be an NTP server. People say it works in general, but I don't think you'll find documentation for it. Besides, there are way too many variables -- your SRX1600 is not a dedicated NTP server, it's doing potentially ...
Just wondering if there's any official Juniper guidance on using JunOS as an NTP server for campus network environments ? I understand that NTP will need to hit the Routing Engine control plane and consume CPU cycles there in order to serve the requests, ...
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.