SRX Next-Gen Firewalls

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.


If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Solved :) ------------------------------ Best regards Marek ------------------------------

  • Hi Nmap scan shows me open port 21 ftp I have deleted system services ftp and alg disable from configuration Why services ftp works and how to disable it? ------------------------------ Best regards Marek ------------------------------

  • Hello , Thanks a lot for your reply . it was indeed related to reth3 ; ports were in wrong vlan . after fixing ports , i can ping internet from both VRs mgmt_junos.inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden) + = Active Route, ...

  • Can you do a trace route and determine where the path fails? I suspect one of two issues: The routing from the reth3 gateway onward is not working. The source nat rules on the reth3 internet path to not allow the translation of the mgmt VR ip address ...

  • Hello , I have cluster of SRX 380 , I have setup two mgmt_junos.inet.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both *[Static/5] 00:17:31 ...

  • Well, turns out that I just needed to call Verizon and have them refresh the line, since all my configs were correct to begin with.

  • There are a couple of how-tos out there with reference to Dual ISP WAN setup, including several within the Juniper community forum. We're not load balancing our outbound traffic, but we do have dual ISP setup, so I thought I'd share what's currently ...

Unanswered Posts

Top Contributors in the Community