Data Center

Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

Yes, adding a the second set of identical commands as you note. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home -------- ...

Hello! Thanks for answer. Do you mean that I should to re-write these commands but with the new IP? Like this: set services service-set SS_NAT_MOBILE_3_0 syslog host 10.163.90.10 services info set services service-set SS_NAT_MOBILE_3_0 syslog ...

Assuming the port is the same you would just add the syslog host commands again with the new ip address. This will create a second stanza for the new server using the same settings as the first one. ------------------------------ Steve Puluka BSEET ...

Hello there! On the network, It has a CGNAT device where the syslog messages are forwarded to a server collector, but we need to send these messages to another server too. Both servers will be collectors... Here is my script, the active server has ...

Is the Midplane REV a requirement when asking parts to providers ? Specially for : - MIC - Chassis - DPC Seems we cannot find any documentation that gives clarifications -- as just last week we were advised that when a REV is higher ...

is the midplane revision a requirement for high-end configuration ? we have experienced that providers & distributors have a hard time clarifying the reason behind REV & Part number changes specially for the parts : MIC DPC Chassis ...