Data Center

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Data Center Architecture and approaches.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Data Center Design Center Documentation Knowledge Base

Latest Discussion Posts

  • Profile Picture

    AI-Native Virtual Network Assistant and New High Performing ...

    By: Arun Gandhi , one year ago

    Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

  • Profile Picture

    cannot ping between irb on the same subnet

    By: Pribadi , 2 days ago

    Hi, I have setup 2 vMX as leaves (no spine at all) and configured them with routing instance type mac-vrf. I added the interface routing with irb. But I cannot ping between the irb on the same VLAN and VNI. Is there any mis-configuration on my setup? ...

  • Profile Picture

    RE: Optics not supporting configured speed on QFX5 ...

    By: Andrey Sokolov , 3 days ago

    Hi Mario. Thank you for the advice and the document. ------------------------------ Andrey Sokolov ------------------------------

  • Profile Picture

    RE: Optics not supporting configured speed on QFX5 ...

    By: Mario Canaveras Martinez , 5 days ago

    Hi Andrey Having links down can be due to multiple reason including 3-party optics. Please refer to https://apps.juniper.net/hct/product/?prd=QFX5240-64OD to validate supported and qualified optics for this platform. Using non-juniper optics could ...

  • Profile Picture

    Optics not supporting configured speed on QFX5240- ...

    By: Andrey Sokolov , 16 days ago

    Hello everyone, I am reaching out to the community for assistance with a problem I am facing during the testing of transceivers (!non-juniper!) on the Juniper QFX5240-64OD switch. The switch is not providing a TX signal on the ports. ...

  • Profile Picture

    Does "Type VRF" and the default switch play ok together? ...

    By: Simon Bingham (technical debt collector) , 28 days ago

    Does "Type VRF" and the default switch play ok together? QFX In a nutshell, I do not want to convert the bridge overlay to mac-vrf. Migration Bridge Overlay ( Before ) Bridge overlay ( After ) Layer 3 ( Before ) ...

  • Profile Picture

    RE: MAC-vRF | vJunos-Router | Only encapsulation mpls ...

    By: Simon Bingham (technical debt collector) , one month ago

    Hi Ethan, I have the same issue. Thanks. ------------------------------ JNCIE-ENT 907 ------------------------------

Announcements

  • Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 


    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • AI-Native Virtual Network Assistant and New High Performing ...

  • cannot ping between irb on the same subnet

  • Does "Type VRF" and the default switch play ok together? ...

  • EVPN VXLAN DCI stitching not working in Lab with vMX ...

  • VLAN-Aware MAC-VRF on ACX 7024

  • EVPN NLRI 6 purpose

  • VXLAN: Table BGP.EVPN.0 and next-hop resolutions

Top Contributors in the Community