Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Data Center Design Center Documentation Knowledge Base
Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...
Hi LEEBAHI >Is this PLP bit an internal marker used within JUNOS platform? Yes,it is. If you want PLP to match between devices, you can use BA classification(this means that you do rewrite DCSP for BA). ------------------------------ ...
Hi LEEBAHI >A single homed MCAST receiver lives behind L1 while there is no receiver behind L2. I checked your topology. Does a MCAST receiver live behind L2？ Both of your p acket captures looks like that source IP is 3.3.3.3 and dst ...
Hi Simon Bingham I think there is no problem since juniper's sample configuration uses only vrf. https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/example/evpn-vxlan-irb-within-data-center.html The benefits of using ...
Hi Simon Bingham Your config looks correct, but there is one unnecessary line. Try to do this. -- delete routing-instances macvrf-v100-1 protocols evpn interconnect encapsulation vxlan -- DCI sometimes doesn't work, but rebooting GW ...
I confirmed that ping works with the following config: leaf1(vQFX) set interfaces irb unit 100 family inet mtu 9000 set interfaces irb unit 100 family inet address 192.168.100.1/24 set interfaces lo0 unit 0 family inet address ...
Hey everyone, Great news – the slides from our "Building with Apstra : Get started & deploy with confidence" webinar are now available! If you missed the live session, you can catch the full replay here ...
The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support.
What’s available?
Log in to see this information