Switching

Alright, I have tried to boot different files from the SRX series, EX series, and EX MP series switches. As long as a USB stick is formatted as FAT32, uBoot will mount the USB stick and allow you to look at files and make some minor changes. I tried ...

Wouldn't that take VLAN 1000, swap it to VLAN 42 and push VLAN 1234 on to it ? so SVLAN 1234 and CVLAN 42 ? That's not the goal. The goal is to only double tag the stuff on unit 2 ------------------------------ STEVEN MADDOX ------------------ ...

Of course the mstp protocol is compatible between Juniper and Cisco. The point here is that you're NOT on the same MSTP region, because: you didn't map the same vlans on the same MSTP instances on all the switches your MSTP config name is not ...

That aside, the MGMT port is there for OOB management, but is causing switch loops when used. Just curious if anyone else had any experience with this. ------------------------------ NICHOLAS MARSZALKOWSKI ------------------------------

I have two EX2300 switches doing the same thing at two different school sites. They lose connection to the Miast dashboard, but I can connect via ssh with MobaXterm. I checked optic power on one with a fiber cable and it's fine. I checked for any errors ...

I've not had to use a vme.0 or mgmt port for my Mist lab setup, I'm just connecting from ge-0/0/0 on a EX4100-F to a ge port on my WAN Edge (SRX320 in this instance). Regards,

That doesn't make sense to me. Mist, by default, relies on the physical MGMT port in the back of the switch, which is vme.0. We use this for OoB management. SSH (or any management) isn't even enabled by default on our IRB interfaces. ------------------------------ ...