Switching

By the kb notes I would say that if a reboot clears the issue there was some kind of memory or software corruption. But if the problem persists after a reboot then there is a hardware issue with either the SRX or SFP module. ------------------------------ ...

Im at a loss here... however, try this. This is what I have on my EX vrrp core switches. By default, the backup VRRP router drops ARP requests for the VRRP-IP to VRRP-MAC address translation. This means that the backup router does not learn ...

root@IF-SW-DC-01> show lacp interfaces Aggregated interface: ae0 LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity et-0/0/48 Actor No No Yes Yes Yes Yes Fast Active et-0/0/48 ...

Do a show LACP interfaces Sent on iPhone. Tedd Steele Tedd Steele ​ ​ ​ ​ SENIOR NETWORK ENGINEER CCDP, CCNP, JNCIA 843.767.7022 703.216.1916 ...

Yes, links configuration on both switches is: set interfaces et-0/0/48 ether-options 802.3ad ae0 set interfaces et-0/0/49 ether-options 802.3ad ae0 set interfaces ae0 aggregated-ether-options lacp active set interfaces ae0 unit 0 family ethernet-switching ...

Between switches 2 physical links bonded to LACP ae interface. ------------------------------ DMYTRO OSTAPENKO ------------------------------

We are assuming your link is like AE0 or AE1 ? Sent on iPhone. Tedd Steele Tedd Steele ​ ​ ​ ​ SENIOR NETWORK ENGINEER CCDP, CCNP, JNCIA 843.767.7022 703.216.1916 ...