Switching

Muhammad, I'm not familiar with Mist NAC (yet), but what does your VoIP VLAN VSA Radius attributes look like? From my experience 22.X (and later) code you must use the Juniper-VoIP-Vlan RADIUS attribute for the VoIP, or remove the static VoIP configuration ...

Hello Team, I am also facing the same issue here that VOIP-Validation failed . I am using a Juniper EX2300 switch and using Mist Auth as an authentication server. We have connected a PC and IP Phone from same port. The user gets connected via 802.1X ...

Hello, Does the ex2300-c model support doing dual root? If yes, how do i disable virtual-chassis on them? Ive delete files, disabled it with > request virtual-chassis mode disable all-members network-port, reboot and its still enabled. i have ...

Hello John, Thank you for reaching out. The recommended upgrade path would be going from 21.4R3 to 22.4R3 and then to 23.4R2-Sx. Please note that a direct upgrade might also be possible but that needs to be tested out on a lab device with the configuration ...

Ah, OK. The chart helps. So, I need to bounce from one EEOL version to another. So 22.4 EEOL is the second one of those above my version and 23.4 is the second one above that. ------------------------------ JOHN WILLIAMSON --------------------- ...

https://support.juniper.net/support/eol/software/junos/ «EEOL» lines are «major». ------------------------------ Olivier Benghozi ------------------------------

So which of these are major releases? ------------------------------ JOHN WILLIAMSON ------------------------------