View Only
last person joined: 6 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Hi, My provider-style configuration on EX. EX4300-1> show configuration interfaces ge-1/0/8 description "UNI: Customer1"; flexible-vlan-tagging; native-vlan-id 206; encapsulation extended-vlan-bridge; unit 0 { vlan-id 206; } EX4300-1> show ...

  • Since the S vlan is the outer most tag the intermediate switch ex2 can use standard vlan configurations and pass the s tag vlan across the switch between ex1 and ex2. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect ...

    1 person recommends this.
  • Profile Picture

    Question on Q-in-Q on EX

    Hi. Consider an L2 provider topology using EX switches as follows. CE-1 ----------------- EX-1 ---- EX-2---- EX-3 ----------------- CE-2 EX-1 is a provider edge bridge and so adds a customer-specific S-tag to the frames coming in from CE-1. ...

  • Switch last 5 ports support 10-G support you can insert last port and check . ------------------------------ Syed Yasir ------------------------------

  • In a continued effort to streamline the RMA process, we have launched new questions/workflows when opening a JTAC ticket that enables you to initiate an RMA on your own. Below is a video walkthrough of the enhanced Self-Service RMA process. Feel free ...

    1 person recommends this.
  • Thank you - I'm thinking it is the no-auto-negotiate issue, however I do not have administrative access to the ISP hardware. That being said, I see the PR that was listed is almost 1 year old, and that as of 3 days ago, Juniper's recommended release ...

  • Profile Picture

    RE: EX4100 - PIC1 and PIC2 require 10G?

    This message was posted by a user wishing to remain anonymous Thanks you - I also noticed the PR advising to disable auto-negotiate is almost 1 year old, also that Juniper's recommended firmware release is now: 22.4R3-S2. I will attempt to upgrade ...


  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community