Switching

I am new to Juniper switching. Purchased a EX2200-24P-4G. I know it is EOL, but I have to start somewhere. I powered it up and it sees my network. I can look at the directory with my media files. When I start a client, the dlna servers do not appear. ...

Hello, I have tried to find a complete answer to this. Most of the documentation relates to the CLI. I am attempting to bring up my EX4400-24x's (2) in a Virtual Chassis. Reading the information about this particular model, it appears that I need to ...

finally I configure ex3400 with cli commands successfully ... ======================================================= % cli root> configure root# delete chassis auto-image-upgrade root# set system root-authentication plain-text-password root# set ...

The list indicates the entire Junos 20 line was released with the fix included for this PR. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home ...

This message was posted by a user wishing to remain anonymous We have seen similar a few years back when running 14.1X53-D30, with backup RE memory usage slowly escalating while primary RE is ok. Try "show system memory" to get a better idea about how ...

Thanks mate you save my day. USB should be connected before the switch start. ------------------------------ MOHAMMED MASI ------------------------------

Yes, if the EX3400 (or any switch doing IGMP snooping) sees an mrouter on one interface (that is, sending IGMP membership queries , PIM packets, or whatever) inside a vlan, it will sends it all the multicast flows present in the vlan, as this is by design ...