Routing

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    RE: Way to know the source of L3 incomplete errors ...

    By: aaron.gould , yesterday

    You mentioned " Juniper KB about L3 incomplete errors as there is no traffic impact due to this." Please let me know what KB you are referring to. ------------------------------ - Aaron ------------------------------

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Chris Mendoza , 2 days ago

    Anway, this has been a great discussion and all answers are appreciated, hopefully you will be hearing from me soon for a different topic. ------------------------------ Chris Mendoza ------------------------------

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Chris Mendoza , 2 days ago

    Thanks Oliver. So if the policy will treat the below as an "AND" logic... community VPRN_700_Community members [ target:11.11.11.11:700 target:22.22.22.22:700 target:44.44.44.44:700 target:55.55.55.55:700 target:66.66.66.66:700 ] Then it should ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Olivier Benghozi , 2 days ago

    In a policy term, when you match several community-lists , it's a logical OR between each community-list. In a policy term, when you match a community-list containing several communities, it's a logical AND inside the community-list (all the values ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Chris Mendoza , 2 days ago

    Hi Dmitriy , So I did as you suggested. I created separate community names for each community. community target:11.11.11.11:700 members target:11.11.11.11:700; community target:22.22.22.22:700 members target:22.22.22.22:700; community target:44.44.44.44:700 ...

  • Profile Picture

    RE: MX204 vrrp

    By: CARS JASPERSE , 3 days ago

    Hello Did you ever find an answer to this issue? we have the same problem today. our temporary solution is to use QFX5120Switch stack(2) as a router/gateway for these /30 subnets. please let me know if anyone found a better solution. Regards, ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Dmitriy , 3 days ago

    For Item 1 As I assumed, if you use import policy in your way, the policy tries to catch routes, which have all enumerated five communities . That's why that output is empty. vMX_R3> show route table bgp.l3vpn.0 community-name VPRN_700_Community ...

Announcements

  • Tell us if you've upgraded or if you need help upgrading!

    Complete this three-question survey to help us identify where you are in your upgrade journey.

Unanswered Posts

  • Inter-domain sr-te lsp just dont comes up

  • EX4550 high CPU Process

  • Routing Issue with VRF Configuration on Juniper Ro ...

  • Deterministic NAT on MS-MPC and logging for port block ...

  • EVPN MPLS Confusion

  • Inter-AS SRv6 on an ASBR that is also a PE...

  • What feature in Juniper QFX5120 that similar with split-horizon ...

Top Contributors in the Community