Routing

 View Only

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussions

  • Profile Picture

    RE: route reflector in 6PE

    By DANIEL NG , 2 days ago

    RR is in the title... correct. ------------------------------ DANIEL NG ------------------------------

  • Profile Picture

    RE: route reflector in 6PE

    By Olivier Benghozi , 3 days ago

    oH, you mean ::ffff:0:0/96 :) Actually I didn't realize you were talking about RRs, so I guess they don't have MPLS connectivity with the other routers, right? ------------------------------ Olivier Benghozi ------------------------------

  • Profile Picture

    RE: route reflector in 6PE

    By DANIEL NG , 3 days ago

    set routing-options rib inet6.3 static route 0:0:0:0:0:ffff::/96 receive ------------------------------ DANIEL NG ------------------------------

  • Profile Picture

    RE: BGP-LS topology id set to 0 after JUNOS 25.x

    By DMYTRO SHYPOVALOV , 4 days ago

    I got a response from someone from Juniper: 1) This is related to multi-instance ISIS. I reconfigured ISIS as ISIS-instance, and applied the command "set protocols isis-instance 101 link-state-instance-id 101". Now BGP-LS routes are advertised with ...

  • Profile Picture

    RE: route reflector in 6PE

    By Olivier Benghozi , 4 days ago

    Which static route are you talking about? ------------------------------ Olivier Benghozi ------------------------------

  • Profile Picture

    BGP-LS topology id set to 0 after JUNOS 25.x

    By DMYTRO SHYPOVALOV , 4 days ago

    Hello Experts, On JUNOS 24.2R1 and earlier, the following config works perfectly fine: set protocols mpls traffic-engineering database import identifier 101 This results in topology id set to 101 in BGP-LS routes, for instance: ...

  • Profile Picture

    route reflector in 6PE

    By DANIEL NG , 5 days ago

    as we know, when using route reflector in 6PE, we need to configure static route in inet6.3 to resolve IPv4-mapped routes. however, i found that configuring the static route in inet6.0 also works the same. is this intended? ------------------------------ ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    By: Jodi Meier Jodi Meier , 7 months ago

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts

  • QinQ VPLS fundamental Issues Not discussed

  • DS-Lite with PCP not working on MS-MIC

  • RSVP LSP vs LDP Route Preference Behavior in Junos

  • Minor alarm: VMHost RE x Disk y Missing on MX960?

  • Ipv6 flowspec

  • dataplane traffic capture to a local pcap file on ...

  • L2VPN not working, what I'm doing wrong