Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Chris Mendoza , 7 hours ago

    Hi Dmitriy , So I did as you suggested. I created separate community names for each community. community target:11.11.11.11:700 members target:11.11.11.11:700; community target:22.22.22.22:700 members target:22.22.22.22:700; community target:44.44.44.44:700 ...

  • Profile Picture

    RE: MX204 vrrp

    By: CARS JASPERSE , yesterday

    Hello Did you ever find an answer to this issue? we have the same problem today. our temporary solution is to use QFX5120Switch stack(2) as a router/gateway for these /30 subnets. please let me know if anyone found a better solution. Regards, ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Dmitriy , yesterday

    For Item 1 As I assumed, if you use import policy in your way, the policy tries to catch routes, which have all enumerated five communities . That's why that output is empty. vMX_R3> show route table bgp.l3vpn.0 community-name VPRN_700_Community ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Dmitriy , yesterday

    Hi, For Item 2 In the Operations we are used to apply policy on both: import and export. policy-statement VPRN_700_Policy { term 1 { from community VPRN_700_Community; then accept; } ...

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Chris Mendoza , yesterday

    Hi Dmitriy, Item 1 A little weird. cmendoza@vMX_R3> show route table bgp.l3vpn.0 community-name VPRN_700_Community bgp.l3vpn.0: 14 destinations, 28 routes (14 active, 0 holddown, 0 hidden) --> this is the whole output cmendoza@vMX_R3> ...

  • Profile Picture

    RE: LDP on RSVP-TE

    By: alin_bandiu , yesterday

    Hi, Looks like a filter problem, could you please share/check the lo0.0 filter? Are you blocking LDP? Regards, Alin ------------------------------ Bandiu Alin-Filip-Gabriel ------------------------------

  • Profile Picture

    RE: L3VPN/VRF Help

    By: Dmitriy , yesterday

    1) Your output of vMX_R3> show route table bgp.l3vpn.0 doesn't show any attached community on the inet-vpn routes without "detail" option. With detail option it has so long outcome. That's why I asked to run the command vMX_R3>show route table bgp.l3vpn.0 ...

Announcements

  • Tell us if you've upgraded or if you need help upgrading!

    Complete this three-question survey to help us identify where you are in your upgrade journey.

Unanswered Posts

  • Inter-domain sr-te lsp just dont comes up

  • EX4550 high CPU Process

  • Routing Issue with VRF Configuration on Juniper Ro ...

  • Deterministic NAT on MS-MPC and logging for port block ...

  • EVPN MPLS Confusion

  • Inter-AS SRv6 on an ASBR that is also a PE...

  • What feature in Juniper QFX5120 that similar with split-horizon ...

Top Contributors in the Community