Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community.
Need additional guidance? Check out these Juniper Resources.
Ask AI Documentation Technical Bulletins Knowledge Base Day One Books
from the command info, it says encapsulation dix is ethernet 2. however, you must enter a vlan id if flexible-vlan-tagging is used. so is this vlan id tagged or untagged or is encapsulation dix vlan unaware like encapsulation ethernet-bridge ? ...
just replicated this in IOS XE in all active mode. when the DF PE failed, the CE immediately lost forwarding despite DF reelection occurred within seconds. looks like the ARP update got some problem that it won't switch over to the other PE since ...
was using multihoming and found that all active worked fine in p2mp but not single active. nothing worked in p2p. following the official guide, i only put the ce-facing interface under routing instance but not 'protcols evpn'. https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/statement/interface-edit-routing-instances-evpn.html ...
Hi. Below I am applying a filter dynamically to subscriber interfaces. Junos does NOT allow me to apply multiple filters. Then what is the purpose of the 'precedence' configuration? With which other filter will the below precedence value of 10 be compared? ...
Thanks so much !! ------------------------------ Be kind!! ------------------------------
Actually you can find the same kind of layered stuff (for import/export) with some other protocols like rip/ripng (global, group, neighbor). About the apply-groups, it's different: apply-groups get merged with the place where they apply, so it's ...
Say CE is mutihomed to PE1 and PE2. PE1 is primary. PE1 "show vpls connections" will show UP to remote PEs. PE2 "show vpls connections" will show a down state (don't remember which exact flag) PE1 interface facing CE will be UP/UP PE2 Interface ...
Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators.