View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Hi Daniel, yes, the usage of auto-export allows to have imported routes of VRF_A appearing in the routing table of VRF_B, but then when I try to export them into BGP to make them available also for remote PEs, it doesn't work. BR ------------------------------ ...

  • Profile Picture

    RE: MX960 policer

    Hello mate, a little bit late but hope this helps. In Junos, if you specify a firewall filter and use it on multiple interfaces, this filter is in nature shared. So, if you apply a policer through this filter, the policer will be shared by every interface ...

  • Hi, are the routes imported from VRF_A to VRF_B shown in the routing table of the instance? ------------------------------ DANIEL TRAN ------------------------------

  • Hi Eridano, For importing routes from VRF to another VRF use RIB groups to ensure two-way communication. Also, are the routes from VRF-A shown in the VRF-B? ------------------------------ DANIEL TRAN ------------------------------

  • Hi Deepak, Just a quick question from my side, do I understand your question correctly? You have a client, lets call it R1, who sends both IPv4 unicast and IPv4 L3VPN routes to a route reflector. And this route reflector should only readvertise the ...

  • Hi, I'm suggest u get advise from Juniper SE at your country. You just need give your requirement and they will provide BoQ what necessary to be put. Thanks

  • Hello, Thanks for the replay, so i can use ebgp and ibgp with base license ? can i use firewall and sflow with the same base license?


Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community