Routing

By «distribute to remote PE», you mean advertise VRF routes in i-MP-BGP, right? So you have to export the route from the exporting VRF (let's say A), not from the importing VFR (let's say B). So make provisions to export the routes toward remote PE ...

Good morning everyone, I wanted to reach out to folks in the community and discuss something that I can't really seem to get a straight answer on. Aside from the major difference in prices, what are the limitations/advantages of the PTX and MX 10K ...

I am starting out with ospf and have the below topo: R0 (ge-0/0/0 11.1.1.1)--- (ge-0/0/0 11.1.1.2)R1 (ge-0/0/1 192.168.10.1) ---- (ge-0/0/1 192.168.10.2)R2 lo0 1.1.1.1 ...

Could you share the policy options for the BGP? BR ------------------------------ DANIEL TRAN ------------------------------

Hi Daniel, yes, the usage of auto-export allows to have imported routes of VRF_A appearing in the routing table of VRF_B, but then when I try to export them into BGP to make them available also for remote PEs, it doesn't work. BR ------------------------------ ...

Hello mate, a little bit late but hope this helps. In Junos, if you specify a firewall filter and use it on multiple interfaces, this filter is in nature shared. So, if you apply a policer through this filter, the policer will be shared by every interface ...

Hi, are the routes imported from VRF_A to VRF_B shown in the routing table of the instance? ------------------------------ DANIEL TRAN ------------------------------