I am struggling in uderstanding the SNAT.
Below is the flow session:
Session ID: 443, Policy name: OK/6, Timeout: 2, Valid
In: 192.168.111.2/51744 --> 22.214.171.124/80;tcp, Conn Tag: 0x0, If: ge-0/0/0.0, Pkts: 6, Bytes: 430,
Out: 126.96.36.199/80 --> 172.30.124.59/16613;tcp, Conn Tag: 0x0, If: ge-0/0/1.0, Pkts: 4, Bytes: 467,
The route lookup happens on the destination IP and hence the Dst-NAT if any is always done before the route lookup as you can see in the flow diagram.
Source NAT does not have any impact on the route lookup. Hope this helps.
Thanks and Regards,
Pradeep Kumar M
|| If this solves your problem, please mark this post as "Accepted Solution" so we can help others too ||
Thanks, Pradkm. This sentence removes the confusion - "Source NAT does not have any impact on the route lookup".