I don't know why but when I write the command show chassis fpc I see that:
someone know why?
Hi, Do you see the PIC under "show chassis hardware" ?
Also try changing the fpc mode to lite-mode "set chassis fpc 0 lite-mode" and see if PICs come online.
I don`t see PIC when I write: "show chassis hardware".
And after I change it to lite mode is still in that state.
Hi, In that case can you check below log for any indicators.show chassis log | match "fpc 0"
Additionally, get console log of fpc vm;
I write that command: "show log chassisd | match fpc"
I added the log
It seems like FPC is not initialising completely
Jul 14 11:45:17 CHASSISD_FRU_UNRESPONSIVE: Error for FPC 0: unresponsive to attempts to start it; left it offlineJul 14 11:45:17 CHASSISD_FRU_OFFLINE_NOTICE: Taking FPC 0 offline: ErrorJul 14 11:45:17 fpc_down slot 0 reason Error cargs 0x0Jul 14 11:45:17 fpc_offline_now - slot 0, reason: Error, error Unresponsive transition state 1Jul 14 11:45:17 fpc_atlas_snmp_get_led_state FPC 0: LED idx2 0 color blinking green value 8Jul 14 11:45:17 i2cs_virtual_power_off Powered OFF FPC 0, bitmap 0Jul 14 11:45:17 FPC#0 - power off [addr 0x11] reason: ErrorJul 14 11:45:17 CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power off (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 246325, jnxFruLastPowerOn 186317)Jul 14 11:45:17 CHASSISD_SNMP_TRAP10: SNMP trap generated: Fru Offline (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 246325, jnxFruLastPowerOn 186317)Jul 14 11:45:17 fpc_atlas_snmp_get_led_state FPC 0: LED idx2 0 color off value 7Jul 14 11:45:17 fpc_offline_now - slot 0, is_resync_ready clearedJul 14 11:45:17 fpc/pic 0/0: No handle for i2c_id 0x0Jul 14 11:45:17 fpc/pic 0/1: No handle for i2c_id 0x0Jul 14 11:45:17 fpc/pic 0/2: No handle for i2c_id 0x0Jul 14 11:45:17 fpc/pic 0/3: No handle for i2c_id 0x0Jul 14 11:45:17 hwdb: entry for fpc 2986 at slot 0 deletedJul 14 11:45:17 send: red alarm set, device FPC 0, reason FPC 0 Hard errors
Jul 14 11:50:14 CHASSISD_UNSUPPORTED_FPC: FPC with I2C ID of 0xbaa is not supported
I suspect this could be related to vmx version ? Did you by any chance perfrom a cli upgrade ?
If not, just for troubleshooting sake config fpc in lite-mode and restart vmx entirety.
Please confirm the hypervisor used and also vCPU & memeory allocated for vCP & vFP.
PFE in Present state can have many reasons.
Ranging from incorrect interface parameters, prodecure to upgrade to underlying host issues to any detail missing or incorrect in XML of the vMX VM
Taking a back step:-
1. How did you end up in the said state ?
2. Was this working and then went into the state after a said change ?
3. What is the XML of the said vMX VM ? On what base are you running the said VM?
1. After I installed the two machines and configure them, I checked if the riot prosses is running with the command: "show chassis hardware". When I saw that is don`t running I checked the fpc and I saw that state.
2. From the beginning, it did not work
3. On which XML are you talking about? I running the machine on ESXI.
Need to add more memory and CPU to the machine then pfc 0 stratus change to online.