Junos OS

last person joined: yesterday 

Ask questions and share experiences about Junos OS.
  • 1.  SRX100 Web Device Manager how to add firewall filter and policer

    Posted 09-02-2019 18:49

    I need to limit the upload/download max bandwidth on specific interface. Then I found the link below.

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB28161

    I logged in to Web Device Manager but cannot find any configuration for bandwidth limitation. Is this can only configure by CLI?



  • 2.  RE: SRX100 Web Device Manager how to add firewall filter and policer
    Best Answer

    Posted 09-02-2019 19:25

    You may use "Point and Click CLI" option in CLI Tools on J-Web

    J-Web -> Cli Tools -> Point and Click CLI -> Firwall -> Policer --Config policer and commit
    J-Web -> Cli Tools -> Point and Click CLI -> Firwall -> Filter -- Config filter
    J-Web -> Cli Tools -> Point and Click CLI -> Interfaces -- Apply filter

     

     



  • 3.  RE: SRX100 Web Device Manager how to add firewall filter and policer

    Posted 09-05-2019 19:32

    Thanks Nellikka. But after I checked the checkbox of "If exceeding" then click "Configure". It show me the configutration summary. I expect some place for me to define the max bandwidth. I rather go back to CLI to set the policy and then check the config in Web Device Manager.