I bought some Juniper EX4200 for my company. So i updated them at the version recommended but the J Web is plenty of bugs.
For exemple : i cannot not validated the changes by the commit operation but they were applied. Another time when I make a modification I do validate in a pop-up, I am obliged of cancelled to close the operation.
So I don't I understand the recommendation of this version, is there any more stable version?
The recommended version is 10.4R5. Look at the wording highlighted in red at https://www.juniper.net/customers/csc/software/junos_software_versions.jsp.
In my experience, 10.4R5 has been rock-solid. Do you have a specific issue? And what is that issue?
From the page you linked above:
Sure looks like 10.RR3 to me. Am I misreading this table.
thanks you for the fast response.The problem is that this version is recommended but is not stable as regards the J Web bug's.
Unfortunately, I think you'll have to pick the version with the fewest problems. In my case, I don't use the JWeb interface.
Are you using Internet Explorer 9 by any chance? We have a preliminary report that it breaks on J-Web. Firefox/Chrome or earlier IE should be fine.
Thanks you for your assistance.
So my problem came from a compatibility with my browser Internet.( with firefox it's work very well )
On the other hand when I updated a stack with the jloader and the good version of JunOS, it happened that the master wasn't updated but i reached manualy to make the upgrade sucessful.