Routing

last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  RE-1300 junos last support version?

    Posted 09-19-2019 06:27

    Hi all,

     

    Currently i have mx480 (no enhance backplane) that using RE-1300 and current junos is 10.0. I know this is old box (EOL) and no JTAC support contract. Based on url below it say the last support junos for this RE is version 14.2. But i check on juniper website just have ver 14.1 with 64 bit. So may i know whether it ok if using 64 bit for this RE-1300. If anyone can share the 14.1 ver 32bit then im very appreciate it. 

     

    https://kb.juniper.net/resources/sites/CUSTOMERSERVICE/content/live/TECHNICAL_BULLETINS/16000/TSB16556/en_US/TSB16556-v1.2.1.pdf

     

    Thanks

     

     



  • 2.  RE: RE-1300 junos last support version?

     
    Posted 09-19-2019 08:11

    Only 32 bit is supported. 

     

    https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html#tbl-mx480-supported-routing-engines

     

     

    You probably need to open a JTAC case and the JTAC engineer can attach this file to the case : 

    jinstall-14.2R6-domestic-signed.tgz

     

     

    Regards

    Arpit 



  • 3.  RE: RE-1300 junos last support version?
    Best Answer

    Posted 09-19-2019 08:15
    Hi kronicklez,

    RE-S-1300 does not has support for 64 bit OS. So you need 32 bit junos OS .Also since its not available on the external portal, could you please open a jtac case/ check with your accounts team to get the 32 bit junos version for 14.2 .

    Regards,
    Jibu