SRX

Expand all | Collapse all

PPPoE BT Infinity unstable connection

Jump to Best Answer
  • 1.  PPPoE BT Infinity unstable connection

    Posted 02-18-2014 08:20
      |   view attached

    Hi,

    I've used the wizard to configure my SRX210 to use PPPoE using our BT Infinity link. Most of the time the link is fine but we've been having a couple of issues lately with the connection dropping out but not re-establishing itself until the SRX box is physically rebooted. NB: I'm assuming this is the cause as the connection picks up once the box has been rebooted and the ISP has no indication of any outages in the area. 

     

    Is there anything in the attached config (which the wizard may miss) that might help SRX re-establish the PPPoE connection should the line drop momentarily?  

     

    Cheers

    Attachment(s)

    txt
    PPPoE_Conf.txt   1K 1 version


  • 2.  RE: PPPoE BT Infinity unstable connection
    Best Answer

    Posted 02-18-2014 08:59

    What about:

    set interfaces pp0 unit 0 pppoe-options idle-timeout 0
    set interfaces pp0 unit 0 pppoe-options auto-reconnect 20



  • 3.  RE: PPPoE BT Infinity unstable connection

    Posted 02-19-2014 01:38

    Thanks I'll add that to the config and see how it goes...



  • 4.  RE: PPPoE BT Infinity unstable connection

    Posted 02-20-2014 07:07

    The additional 2 lines of config seems to have worked satisfactorily.

    Much appreciated