SRX

last person joined: 12 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  fabric physical up ,but Fabric link status: Down . why

    Posted 03-25-2016 09:08
    show chassis cluster interfaces  
    Control link status: Up
    
    Control interfaces: 
        Index   Interface        Status
        0       em0              Up    
        1       em1              Up    
    
    Fabric link status: Down
    
    Fabric interfaces: 
        Name    Child-interface    Status
                                   (Physical/Monitored)
        fab0    ge-0/0/1           Up   / Down
        fab0   
        fab1    ge-4/0/1           Up   / Down
        fab1  


  • 2.  RE: fabric physical up ,but Fabric link status: Down . why

    Posted 03-25-2016 12:13

    Hello

     

    What version of JUNOS are you using ?

     

    Are you using 40 GE modules for your fabric links ?

     

    We experienced this same issue we were running 12.1.X47 D10 the temporary work around was to convert the 40 GE to 10 GE fabric links using loaner card from Juniper.

     

    The permanent fix is in 12.1.x47 D35 which was released in the begining of March 2016 and the DMI schema came out in the middle of March 2016.

     

    Thanks

     



  • 3.  RE: fabric physical up ,but Fabric link status: Down . why

    Posted 03-25-2016 12:43

    thanks  for your reply . version 12.1X44-D45.2. we don't use 40 GE modules for   fabric links. just two cable connect directly between two device 



  • 4.  RE: fabric physical up ,but Fabric link status: Down . why

    Posted 03-27-2016 06:59

    What do you see as the cluster status?  There might be a clue there as to what the issue is.

     

    show chassis cluster status