SRX

Expand all | Collapse all

srx active/passive cluster

Jump to Best Answer
  • 1.  srx active/passive cluster

    Posted 06-25-2014 08:47

    folks

     

    i have an srx 650 in production and i need to introduce an another box and create a ha pair

     

    can anyone point me in the right direction with a configuration guide please?

     

    i can get some downtime if needed but only an hour at most

     

    thanks to anyone taking the time to respond



  • 2.  RE: srx active/passive cluster
    Best Answer

     
    Posted 06-25-2014 14:30

    The basic steps for the SRX650 are listed in KB15503.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB15503

     

    the process does require reboots on both nodes during the setup but you should have no issue finishing within the hour window.

     

    Do note that the links between the nodes are assigned specific ports for each SRX device.  So you might have to move some existing configuration to a different port if you are already using the cntl or fab ports for something else.



  • 3.  RE: srx active/passive cluster

    Posted 06-27-2014 05:02

    spuluka

     

    many thanks for this, its greatly appreciated