Sorry if this is not what you are looking for I'm not sure I follow the question. I think you are asking how to identify which policies have 10.1.1.1/32 as a source address configured.
If the configuration is to that exact ip address first find the address object.
show configuration | display set | match 10.1.1.1/32
Take the name of the object and look for policies where this is configurated
show configuration security policy | display set | match NAME_ADDRESS
This will show where this is configured in policy and you can modify the policy from there.
If the policy is in active use you could also see the name of the policy in sessions on the firewall
show security flow session source-prefix 10.1.1.1/32
The session details will include the policy information.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home------------------------------
Original Message:
Sent: 10-04-2022 19:14
From: Unknown User
Subject: SRX firewall
hi
just a quick question - lets say you have source IP address configured on a firewall 10.1.1.1/32 on an existing policy, and you have been given a new destination IP address of 10.2.2.2/32 which needs to be added to the existing policy on the firewall, also lets say you have 20 firewall in the network (if you didnt know what firewall the source IP address is configured on how would you determine what firewall it is to be added to??????