Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  Configure Multicast sender & receiver using LSYS with vMX

    Posted 05-14-2018 13:21

    Hello,

    I'm preparing myself for JNCIP-SP. I would like to setup multicast network using LSYS with vMX. Multicast sender & receiver will be also LSYS. The network diagram look like shown below :

      MulticastLab.png

    Assume that R5 & R6 are members of multicast group 224.0.7.7. 

    I configured PIM spare mode in R1,R2 & R3 interfaces. R2 is RP. My concern is  to know  which configuration required so that multicast traffic could flow from R4 to R5 & R6.


    #JunOSJNCIP-SPJMR


  • 2.  RE: Configure Multicast sender & receiver using LSYS with vMX
    Best Answer

     
    Posted 06-07-2018 15:02

    Hello Besscou

    In a usual scenario, we would expect joins to come from the receiver hosts to the router. But for your lab, you can try configuring static joins on R5 and R6 interfaces

    https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/multicast-igmp-static-group-membership-enabling.html

     

     

    Thanks
    Shijo