> I really don't understand why juniper did this...hopefully they fix it in upcoming releases.
It seems Juniper doesn't see this as a problem. It's 2016 and still the same. Anyway, Can anyone pls let me know, why this is not working?
set groups VSTP_DEFAULT protocols vstp vlan <*> interface <*>
set protocols vstp apply-groups VSTP_DEFAULT
... other vlans, interfaces, edge ports
set protocols vstp vlan 1000 interface ge-2/0/47 edge
set protocols vstp vlan 1000 interface ae7 edge
set protocols vstp vlan 1000 interface ae8 edge
So do the DEFAULT on all vlans on all interfaces.
If I enter
set protocols vstp vlan 1000 interface ae0
I do see STP running on vlan 1000 on ae0.
ae0 128:3 128:3 33768.80acac1f4d00 1000 FWD ROOT
But without that line, I don't.
schoberw@sw1s> show spanning-tree interface vlan-id 1000
Spanning tree interface parameters for VLAN 1000
Interface Port ID Designated Designated Port State Role
port ID bridge ID Cost
ae7 128:10 128:10 33768.80acac1f5cc0 10000 BLK DIS
ae8 128:11 128:11 33768.80acac1f5cc0 10000 BLK DIS
{master:1}
schoberw@sw1s>
IMHO "set protocols vstp vlan 1000 interface ae0" should be derived from group "protocols vstp vlan <*> interface <*>".
Why it isn't?
Thanks
Walter